If Santa didn't bring you the Hy-Steer Arms you wanted for Christmas, don't fret. Artec Industries has you covered. Check out their new Ultamate Dana 60 arms for Reid racing knuckles.

Whether you are just starting out with crossover steering or going full hydro, these arms are meant to handle it all.

Paired with our optional Knuckle Bolt Kit, the exclusive design of these arms not only allow you to set how you attach your steering links but where as well and increase overall knuckle and steering strength at the same time. Rather than use the factory kingpin springs, the knuckle is held together with a spring-less design that uses a set screw to adjust the torque required to hold together. This eliminates some of the slop that is commonly found in axles that receive moderate off-road abuse. The hardware for a spring-less conversion is included and consists of a 3/4" set screw, jam nut, grease zerk, .250" thick load washer, and upper kingpin bushing for each arm.
Studs and nuts are not included and are available for purchase separately.

The Knuckle Bolt Kit is available separately and comes with a 3/4" grade 8 bolt, a 3/4" all- steel
mechanical locking nut, and a 1.25" outer diameter, .250" wall sleeve. The sleeve is machined to allow direct contact and proper misalignment for a 3/4" rod end (heim) ball. The Knuckle Bolt hole is NOT machined into the high steer arm, and the customer will be required to align and drill their own hole in both their knuckle and high steer arm with a 3/4" drill bit.

NOTE: Wheels with extremely large backspacing should not be used in conjunction with this high steer arm. These arms have been confirmed to fit 4.75" backspaced wheels. Will NOT work with factory backspaced H1 wheels.

FEATURES:
• Designed to incorporate Knuckle Bolt Kit increasing strength
• Optional Knuckle Bolt Kit puts full hydro in DOUBLE SHEER
• Crossover Steering or Full Hydraulic Steering compatible
• Machined blank to allow customizable tie rod location
• Optional drilling for GM TRE's or 3/4" bolts for small charge
• Proper 9 degree angle to compensate for knuckle kingpin inclination
• Spring-less design eliminates slop caused by preloaded spring
• Spring-less hardware included
• Grease zerk fitting for kingpin lubrication
• 5 tapered stud holes for use with OEM or Reid Racing Knuckles
• Optional 6 holes w/ machined Keyway for Solid Axle Knuckles
• CNC Machined from 1.25" thick 1018 Cold Roll Steel
• Precision machined Artec Industries Logo
• Aerospace-quality spec machined
• Custom Finishes available upon request

"These new arms are the most feature packed, flexible Dana 60 high steer arms on the market,"
says Art Nuttall, President of Artec Industries. "This functionality has proven itself over the years
in many custom 4x4 vehicles and we are excited to be the first to offer it on a production scale.
We've designed these arms to be so flexible and strong, they will be the only high steer arms
you'll ever need!"
The Ultimate Dana 60 High Steer Arms are the first product in Artec Industries' new line of
steering products and are based off of years of experience manufacturing steering components.
The arms are machined for 1018 cold‐rolled steel and feature a spring‐less design which
eliminates the slop commonly associated with kingpin axles. The arms are available with
multiple options to customize them to the end‐user's needs.
Located in southern Arizona, Artec Industries manufactures aftermarket components for the
automotive, marine, and construction industries. Artec’s professional design team has years of
experience in extreme automotive applications, 4x4, boating and racing. Their fully equipped
production floor is capable of taking a project from design to full scale manufacturing all inhouse.
For additional information, please contact Nate Price or visit www.artecindustries.com. The
Ultimate Dana 60 High Steer Arms will be available for shipment in middle December 2010.

Artec Industries 520-906-9977

For more detailed photos check it out in our fourms section here.